Dry weight: 24,000 lbs
The Sea Hawk - Pro 45
Base Flybridge Model
Standard Equipment and Specification List
LOA: 48- 7 (Including bow pulpit and dive platform)
Beam: 15-5 at amidship
Weight: 24,000 lbs. approx.
Hull: Solid 100% hand laid fiberglass w/ vinylester resin
barrier coat, complete w/ full set of fiberglass composite
bulkheads. Full length fiberglass composite stringers.
Deck framing: All deck support framing utilizes fiberglass
beams. No structural wood anywhere in the boat.
Cap: Fiberglass cuddy cap, foredeck, bow pulpit and molded
non-skid gunwales. Cap is secured to hull w/ S.S. fasteners
@ 8 o/c. and 3M 5200 adhesive, then bonded with fiberglass.
Continuous rigid PVC rub rail.
Cuddy cabin: Companionway door and hatch w/ steps leads to
a roomy stand up cuddy cabin. Cabin has dual bunks on port
side w/ storage below and shelving on stbd side, a head and
a rope locker access hatch. Head has a manual marine toilet
w/ 20 gallon holding tank and Y valve for direct overboard
Main Cabin: Molded fiberglass composite construction main
cabin w/ sliding aluminum side windows (tinted). Main cabin
is open to cockpit in standard configuration. No front cabin
windows in base boat.
Honeycomb/fiberglass composite decks (no plywood and no
raised engine boxes).
Non skid finish on all decks.
Self bailing decks.
All deck hatches have integral gutters w/ drains.
Two (2) integral fiberglass 150 gallon vented diesel fuel
tanks w/ shut offs. (U.S.C.G. Certified boats have aluminum
Tanks are centerline tanks for better balance and lower center of gravity.
Engine as chosen.
Racor fuel filters.
Bronze raw water intake strainers.
Metal engine mounts bolted to stringers.
Fiberglass exhaust system.
(Note: This is the base model power. In the event an
optional engine package is selected, the relevant systems
will be sized as required or recommended for that specific
1-3/4 A19 stainless steel shafts. (Shaft size varies w/
Fiberglass shaft logs.
Dripless shaft seals.
Bronze rudders, rudder ports and tiller arms.
Bronze 3-blade props.
Bronze external scoop strainers.
All thru hulls below water line are bronze w/ full flow
Flybridge Helm Station
Padded helm seat.
Bench style seating for 12 persons.
Hydraulic steering assembly.
Stainless steel destroyer wheel.
Single function twin lever engine controls.
High speed compass.
Engine instrument panels.
Radar arch w/ bimini top.
12-Volt electrical system w/ 8-circuit switch panel.
Two (2) 4D batteries in battery boxes w/ two (2) selector
Overhead dome lights in cabin, cuddy and head.
12-Volt automatic bilge pump system.
Aluminum bow rail.
Two (2) 12 handrails on cabin sides.
Anti-fouling bottom paint (2 coats) w/ boot stripe.
Complete electrical bonding system w/ zincs on hull,
rudder and shaft.
Seven (7) 12 heavy-duty stainless steel cleats.
Note: This is the base flybridge package. Many different
style and equipment options are available. Please
contact us for full price and
options list. Specifications subject to change