The Sea Hawk - Island Hopper 30
Base Cabin Model
Standard Equipment and Specification List

Specifications

LOA: 31’-6” (including bow pulpit and dive platform)
Beam: 12’-2”
Draft 24” to 28”
Dry weight 9,000 lbs. approx.

Construction

• Hull: Solid 100% hand laid fiberglass w/ vinylester resin barrier coat, complete w/ main and two (2) secondary fiberglass composite bulkheads. Full-length fiberglass composite stringers.
• Cap: Hand laid fiberglass composite construction of cuddy including foredeck and molded non- skid gunwales. Cap is secured to hull w/ S.S. fasteners @ 8” o/c. and 3M 5200 adhesive, then bonded with fiberglass. Continuous rigid PVC rub rail.
• Cuddy cabin: Companionway door & hatch w/ steps leads to a roomy stand up cuddy cabin. Cabin has a “V” bunks w/ storage below, shelf above and rope locker forward. Manual marine head is situated between “V” bunks.
• Main Cabin: Hand laid fiberglass composite construction w/ 6’–5” head clearance, aluminum center opening three section front windshield and sliding aluminum side windows (tinted). Main cabin is open to cockpit in standard configuration.
• Misc: There is no plywood used anywhere in the construction of this boat. Some closed cell coring material is used in cap & cabin only for weight reduction and insulation value. The hull itself is solid hand-laid fiberglass and has no coring material.

Decks

• Honeycomb/fiberglass composite decks (no plywood).
• Non-skid finish on all decks and gunwales.
• Self-bailing decks.
• Flush hatches.
• All deck hatches have integral gutters w/ drains.
• Hinged 4’ x 6’ motor box, 15” high.

Fuel Tanks

• Two (2) fiberglass 100 gallon vented diesel fuel tanks w/ shut offs. (U.S.C.G. Certified boats have aluminum tanks.)
• Tanks are molded to fit hull contour and are bonded in place.

Motor

• Yanmar 6LPA-DTP 260 hp fresh water cooled diesel marine engine w/ Hurth/ZF gears.
• Racor fuel filter.
• Bronze raw water intake strainer.
• Metal engine mounts bolted to stringers.
• Fiberglass exhaust system.
(Note: This is the base model engine. In the event an optional engine or engines are selected, the relevant systems will sized as required or recommended for that specific configuration.

Underwater Gear

• 1-1/2” A19 stainless steel shaft. (Shaft size varies w/ engine horsepower)
• Fiberglass shaft log.
• Bronze shaft packing box.
• Bronze strut.
• Bronze rudder, rudder port, and tiller arm.
• Bronze 3-blade prop.
• Bronze external scoop strainer.
• All thru hulls below water line are bronze w/ full flow ball valves.

Helm Station

• Padded helm seat on pedestal.
• Fiberglass console.
• Hydraulic steering assembly.
• Stainless steel “destroyer” wheel.
• Twin lever engine control.
• High speed compass.
• Engine instrument panel.
• Fuel gauges.

Electrical

• 12-volt electrical system.
• 5 circuit fused switch panel.
• Two (2) 4D batteries.
• Battery selector switch.
• Halogen dome lights in cuddy and cabin.
• Navigational lighting.

Miscellaneous equipment

• Bow rail (half length)
• Two (2) 60” cabin top handrails.
• Complete electrical bonding system w/ zincs on hull, rudder and shaft.
• Five (5) 10” stainless steel cleats.
• 1500 GPH Automatic bilge pump.
• Anti - fouling bottom paint, (2 coats) w/ boot stripe.
• Manual marine head w/ 6 gallon holding tank.
• Diverter valve to allow direct overboard waste discharge.

Note: This is the base cabin model boat package. Many different engine, style and equipment options are available. Please contact us for full price and options list. Specifications subject to change without notice.

Phone: (863) 385-1995     Fax: (863) 385-7175     Email:  info@SeaHawkBoats.com